Solvit Korea offers a solution
that is different from the existing insulation.
that is different from the existing insulation.
Valve cover
Korea Solvit valve cover insulates various valves, elbows,
flanges, reducers, strainers, etc. a removable cover instead of tin, reducing the time
and cost of checking and repairing valves reasonably.
flanges, reducers, strainers, etc. a removable cover instead of tin, reducing the time
and cost of checking and repairing valves reasonably.
Applications
Application field
Chemical Plant
Power plant
Shipbuilding field
Features
Features
IMPROVEMENT OF WORKER ENVIRONMENT AND CONVENIENCE
- Insulation material is inserted and the insulation material does not scatter when attached or detached.
- The time required for attachment and detachment is about one - fifth of that of conventional tin , making the operation very simple.
ENERGY SAVING AND REPAIR COST REDUCTION
- It is made at about half the thickness of existing insulation materials and exhibits more than twice the insulation effect
- It is helpful to save energy that was dissipated through gaps by presenting a reliable insulation method in places where the existing space was not insulated due to the narrow space .
- The high durability of the removable insulation material itself helps to reduce costs by eliminating repair costs caused by frequent inspections .
KOREA SOLVIT INSULATION COVER STRUCTURE
Solution
Solvit Korea provides optimal construction solutions.
1
Thinner than half the insulation thickness
2
Energy cost saving by reducing the existing nozzle section
3
Reconstruction cost saving due to detachment
4
Re-investment cost saving by reusing insulation material during replacement cycle
5
Energy efficiency increase
6
Reconstruction cost zero
7
Detachable time 5 minutes per unit.
8
Initial cost of reinvestment cost x30
example
These are examples of construction by Solvit Korea.
Before
When disassembling the valve cover, the periphery is in close contact.
In many cases, only tin shells are covered without interior materials.
Tin is difficult to repair and is vulnerable to external impact.
4R must be discarded if the shell is contaminated and is susceptible to moisture.
After
1st teflon cover
Insulation damage or sagging due to moisture penetration does not occur.
Even if it is installed in the outdoor section, it is not wet or penetrated by rain.
2nd teflon cover
It is specialized in antifouling and waterproof functions.
When purchasing only the second Teflon cover, 1/3 of the initial investment cost is reduced.
